查看完整版本: 请问 Mr. zhang. 如何标注 ISO view。

请问 Mr. zhang. 如何标注 ISO view。

在标注的时候，不能根据需要进行标注 iso 视图。一般是如何做的？
还有一个问题，BOM里的 QTY 改成 item quantity 后，就不能再修改其中的数量了。这怎么解决？
谢谢。

In Inventor, you  will not get true dimensions in ISO view.  Only the diameters or radius you can get the true dimension.  The new version to be released will have the capability to dimension ISO view.


ITEM QUANTITYs cannot be modefied, because it is a ready only system parameter.  However, QTY is not a ready only parameter.  When you generate your BOM, Inventor automatically fill the QTY column with the values of ITEM QUANTITY.

If you want to have manual modification on component quanties, you have to use QTY instead of ITEM QUANTITY.

That is just what I want to know as well.

Hope Inventor become better and better for users.

Thank you very much.

哦，原来这样的。谢谢。

问题是我用Quantities时，很多相同型号的型材都是计算总的长度，在bom里出现长度单位，这怎么办呀？

If you don't want the total length for the item, you just delete the QTY column, and add Item QTY column.  I don't understand why you want to modify Item QTY.  It is not editable.  If you don't like to use Item QTY, you can replace the total length in QTY column manually.

我很需要这样的override，用到复杂的钢结构装配，经常出现这样的问题。如果用总长度表示一种规格，则无法表示出单件的长度，导致现场施工时，工人常搞错。
如果用Item quantity表达，对于一个有100多个零件的清单，难免要纠正一些设计中的失误，有时还要纠正一些压缩(supress)后的零件数量（特别是阵列后的，其中要压缩掉几个）。
这看来是个矛盾？这种使用inventor装配的方法有什么问题没有？我全是自学的，没有正规训练过。
再次谢谢张老师的指导。

There is no perpect solution.  You either manually change the numbers in QTY or accept the ITEM QTY.   It is impossible mix them.

I just installed inventor 2008, iso view can be dimensioned. so coo. hope inventor is more and more powerful and functional.

此功能很实用.

更正

perpect
应该改为
perfect
吧，我的英文不好，也许会说错哦