查看完整版本: 金属材料词汇

金属材料词汇

金属材料词汇



物料科学
Material Science
物料科学定义Material Science Definition
加工性能
Machinability
强度
Strength
抗腐蚀及耐用
Corrosion & resistance durability
金属特性
Special metallic features
抗敏感及环境保护
Allergic, re-cycling & environmental protection
化学元素
Chemical element
元素的原子序数
Atom of Elements
原子及固体物质
Atom and solid material
原子的组成、大小、体积和单位图表
The size, mass, charge of an atom, and is particles (Pronton,Nentron and Electron)
原子的组织图
Atom Constitutes
周期表
Periodic Table
原子键结
Atom Bonding
金属与合金 Metal and Alloy
铁及非铁金属
Ferrous & Non Ferrous Metal
金属的特性
Features of Metal
晶体结构 Crystal Pattern
晶体结构，定向格子及单位晶格
Crystal structure, Space lattice & Unit cell
X线结晶分析法
X – ray crystal analyics method
金属结晶格子 Metal space lattice
格子常数 Lattice constant
米勒指数 Mill's Index
金相及相律 Metal Phase and Phase Rule
固熔体 Solid solution
置换型固熔体 Substitutional type solid solution
插入型固熔体 Interstital solid solution
金属间化物 Intermetallic compound
金属变态
Transformation
变态点
Transformation Point
磁性变态
Magnetic Transformation
同素变态
Allotropic Transformation
合金平衡状态
Thermal Equilibrium
相律
Phase Rule
自由度
Degree of freedom
临界温度
Critical temperture
共晶
Eutectic
包晶温度 Peritectic Temperature
包晶反应 Peritectic Reaction
包晶合金 Peritectic Alloy
亚共晶体 Hypoeutetic Alloy
过共晶体 Hyper-ectectic Alloy
金属的相融、相融温度、晶体反应及合金在共晶合金、固熔孻共晶合金及偏晶反应的比较
Equilibrium Comparision
金属塑性 Plastic Deformation
滑动面 Slip Plan
畸变 Distortion
硬化 Work Hardening
退火 Annealing
回复柔软 Crystal Recovery
再结晶 Recrystallization
金属材料的性能及试验
Properties & testing of metal
化学性能
Chemical Properties
物理性能
Physical Properties
颜色
Colour
磁性
Magnetisum
比电阻
Specific resistivity & specific resistance
比重
Specific gravity & specific density
比热
Specific Heat
热膨胀系数
Coefficient of thermal expansion
导热度
Heat conductivity
机械性能 Mechanical properties
屈服强度(降伏强度) (Yield strangth)
弹性限度、阳氏弹性系数及屈服点
elastic limit, Yeung's module of elasticity to yield point
伸长度
Elongation
断面缩率
Reduction of area
金属材料的试验方法
The Method of Metal inspection
不破坏检验
Non – destructive inspections
渗透探伤法
Penetrate inspection
磁粉探伤法
Magnetic particle inspection
放射线探伤法
Radiographic inspection
超声波探伤法
Ultrasonic inspection
显微观察法
Microscopic inspection
破坏的检验
Destructive Inspection
冲击测试
Impact Test
疲劳测试
Fatigue Test
潜变测试 Creep Test
潜变强度
Creeps Strength
第壹潜变期
Primary Creep
第二潜变期
Secondary Creep
第三潜变期
Tertiary Creep
主要金属元素之物理性质
Physical properties of major Metal Elements
工业标准及规格 – 铁及非铁金属
Industrial Standard – Ferrous & Non – ferrous Metal
磁力 Magnetic
简介 General
软磁 Soft Magnetic
硬磁 Hard Magnetic
磁场 Magnetic Field
磁性感应 Magnetic Induction
透磁度 Magnetic Permeability
磁化率 Magnetic Susceptibility (Xm)
磁力(Magnetic Force)及磁场(Magnetic Field)是因物料里的电子(Electron)活动而产生
抗磁体、顺磁体、铁磁体、反铁磁体及亚铁磁体
Diamagnetism, Paramagnetic, Ferromagnetism,Antiferromagnetism & Ferrimagnetism
抗磁体 Diamagnetism
磁偶极子 Dipole
负磁力效应 Negative effect
顺磁体 Paramagnetic
正磁化率 Positive magnetic susceptibility
铁磁体 Ferromagnetism
转变元素 Transition element
交换能量 Positive energy exchange
外价电子 Outer valence electrons
化学结合 Chemical bond
自发上磁 Spontaneous magnetization
磁畴 Magnetic domain
相反旋转 Opposite span
比较抗磁体、顺磁体及铁磁体
Comparison of Diamagnetism, Paramagnetic & Ferromagnetism
反铁磁体 Antiferromagnetism
亚铁磁体 Ferrimagnetism
磁矩 magnetic moment
净磁矩 Net magnetic moment
钢铁的主要成份
The major element of steel
钢铁用"碳"之含量来分类
Classification of Steel according to Carbon contents
铁相
Steel Phases
钢铁的名称
Name of steel
纯铁体
Ferrite
渗碳体
Cementitle
奥氏体 Austenite
珠光体及共释钢
Pearlite &Eutectoid
奥氏体碳钢
Austenite Carbon Steel
单相金属
Single Phase Metal
共释变态
Eutectoid Transformation
珠光体 Pearlite
亚铁释体
Hyppo-Eutectoid
初释纯铁体 Pro-entectoid ferrite
过共释钢 Hype-eutectoid
珠光体
Pearlite
粗珠光体 Coarse pearlite
中珠光体 Medium pearlite
幼珠光体 Fine pearlite
磁性变态点 Magnetic Transformation
钢铁的制造
Manufacturing of Steel
连续铸造法 Continuous casting process
电炉 Electric furnace
均热炉 Soaking pit
全静钢 Killed steel
半静钢 Semi-killed steel
沸腾钢(未净钢) Rimmed steel
钢铁生产流程 Steel Production Flow Chart
钢材的熔铸、锻造、挤压及延轧
The Casting, Fogging, Extrusion, Rolling & Steel
熔铸 Casting
锻造 Fogging
挤压 Extrusion
延轧 Rolling
冲剪 Drawing & stamping
特殊钢 Special Steel
简介
General
特殊钢以原素分类
Classification of Special Steel according to Element
特殊钢以用途来分类
Classification of Special Steel according to End Usage
易车(快削)不锈钢
Free Cutting Stainless Steel
含铅易车钢
Leaded Free Cutting Steel
含硫易车钢
Sulphuric Free Cutting Steel
硬化性能
Hardenability
钢的脆性
Brittleness of Steel
低温脆性 Cold brittleness
回火脆性 Temper brittleness
日工标准下的特殊钢材
Specail Steel according to JIS Standard
铬钢 – 日工标准 JIS G4104
Chrome steel to JIS G4104
铬钼钢钢材 – 日工标准 G4105 62
Chrome Molybdenum steel to JIS G4105
镍铬 – 日工标准 G4102 63
Chrome Nickel steel to JIS G4102
镍铬钼钢 – 日工标准 G4103 64
Nickel, Chrome & Molybdenum Steel to JIS G4103
高锰钢铸 – 日工标准
High manganese steel to JIS standard
片及板材
Chapter Four-Strip, Steel & Plate
冷辘低碳钢片(双单光片)(日工标准 JIS G3141) 73 - 95
Cold Rolled (Low carbon) Steel Strip (to JIS G 3141)
简介
General
美材试标准的冷辘低碳钢片
Cold Rolled Steel Strip American Standard – American Society for testing and materials (ASTM)
日工标准JIS G3141冷辘低碳钢片(双单光片)的编号浅释
Decoding of cold rolled(Low carbon)steel strip JIS G3141
材料的加工性能 Drawing abillity
硬度 Hardness
表面处理 Surface finish
冷辘钢捆片及张片制作流程图表
Production flow chart cold rolled steel coil sheet
冷辘钢捆片及张片的电镀和印刷方法
Cold rolled steel coil & sheet electro-plating & painting method
冷辘(低碳)钢片的分类用、途、工业标准、品质、加热状态及硬度表
End usages, industrial standard, quality, condition and hardness of cold rolled steel strip
硬度及拉力 Hardness & Tensile strength test
拉伸测试(顺纹测试)
Elongation test
杯突测试(厚度: 0.4公厘至1.6公厘，准确至0.1公厘 3个试片平均数)
Erichsen test (Thickness: 0.4mm to 1.6mm, figure round up to 0.1mm)
曲面(假曲率)
Camber
厚度及阔度公差 Tolerance on Thickness & Width
平坦度(阔度大于500公厘，标准回火)
Flatness (width>500mm, temper: standard)
弯度 Camber
冷辘钢片储存与处理提示
General advice on handling & storage of cold rolled steel coil & sheet
防止生锈
Rust Protection
生锈速度表
Speed of rusting
焊接 Welding
气焊 Gas Welding
埋弧焊 Submerged-arc Welding
电阻焊 Resistance Welding
冷辘钢片(拉力: 30-32公斤/平方米)在没有表面处理状态下的焊接状况

Spot welding conditions for bared (free from paint, oxides etc) Cold rolled mild steel sheets(T/S:30-32 Kgf/ μ m2)
时间效应(老化)及拉伸应变
Aging & Stretcher Strains
日工标准(JIS G3141)冷辘钢片化学成份
Chemical composition – cold rolled steel sheet to JIS G3141
冷辘钢片的"理论重量"计算方程式
Cold Rolled Steel Sheet – Theoretical mass
日工标准(JIS G3141)冷辘钢片重量列表
Mass of Cold-Rolled Steel Sheet to JIS G3141
冷辘钢片订货需知
Ordering of cold rolled steel strip/sheet
其它日工标准冷轧钢片(用途及编号)
JIS standard & application of other cold Rolled Special Steel
电镀锌钢片或电解钢片
Electro-galvanized Steel Sheet/Electrolytic Zinc Coated Steel Sheet
简介
General
电解/电镀锌大大增强钢片的防锈能力
Galvanic Action improving Weather & Corrosion Resistance of the Base Steel Sheet
上漆能力 Paint Adhesion
电镀锌钢片的焊接
Welding of Electro-galvanized steel sheet
点焊
Spot welding
滚焊
Seam welding
电镀锌(电解)钢片
Electro-galvanized Steel Sheet
生产流程
Production Flow Chart
常用的镀锌钢片(电解片)的基层金属、用途、日工标准、美材标准及一般厚度
Base metal, application, JIS & ASTM standard, and Normal thickness of galvanized steel sheet
锌镀层质量 Zinc Coating Mass
表面处理 Surface Treatment
冷轧钢片 Cold-Rolled Steel Sheet/Strip
热轧钢片 Hot-Rolled Sheet/Strip
电解冷轧钢片厚度公差
Thickness Tolerance of Electrolytic Cold-rolled sheet
热轧钢片厚度公差
Thickness Tolerance of Hot-rolled sheet
冷轧或热轧钢片阔度公差
Width Tolerance of Cold or Hot-rolled sheet
长度公差 Length Tolerance
理论质量 Theoretical Mass
锌镀层质量(两个相同锌镀层厚度)
Mass Calculation of coating (For equal coating)/MM
锌镀层质量(两个不同锌镀层厚度)
Mass Calculation of coating (For differential coating)/MM
镀锡薄铁片(白铁皮/马口铁) (日工标准 JIS G3303)
简介
General
镀锡薄铁片的构造
Construction of Electrolytic Tinplate
镀锡薄钢片(白铁皮/马日铁)制造过程
Production Process of Electrolytic Tinplate
锡层质量
Mass of Tin Coating (JIS G3303-1987)

两面均等锡层
Both Side Equally Coated Mass
两面不均等锡层
Both Side Different Thickness Coated Mass
级别、电镀方法、镀层质量及常用称号
Grade, Plating type, Designation of Coating Mass & Common Coating Mass
镀层质量标记
Markings & Designations of Differential Coatings
硬度 Hardness
单相轧压镀锡薄铁片(白铁皮/马口铁)
Single-Reduced Tinplate
双相辗压镀锡薄钢片(马口铁/白铁皮)
Dual-Reduction Tinplate
钢的种类 Type of Steel
表面处理 Surface Finish
常用尺寸 Commonly Used Size
电器用硅 [硅] 钢片 Electrical Steel Sheet
简介 General
软磁材料 Soft Magnetic Material
滞后回线 Narrow Hystersis
矫顽磁力 Coercive Force
硬磁材料 Hard Magnetic Material
最大能量积 Maximum Energy Product
硅含量对电器用的低碳钢片的最大好处
The Advantage of Using Silicon low Carbon Steel
晶粒取向(Grain-Oriented)及非晶粒取向(Non-Oriented)
Grain Oriented & Non-Oriented
电器用硅 [硅] 钢片的最终用途及规格
End Usage and Designations of Electrical Steel Strip
电器用的硅 [硅] 钢片之分类
Classification of Silicon Steel Sheet for Electrical Use
电器用钢片的绝缘涂层
Performance of Surface Insulation of Electrical Steel Sheets
晶粒取向电器用硅钢片主要工业标准
International Standard – Grain-Oriented Electrical Steel Silicon Steel Sheet for Electrical Use
晶粒取向电器用硅钢片 Grain-Oriented Electrical Steel
晶粒取向，定取向芯钢片及高硼定取向芯钢片之磁力性能及夹层系数(日工标准及美材标准)

Magnetic Properties and Lamination Factor of SI-ORIENT-CORE& SI-ORIENT-CORE-HI B Electrical Steel Strip (JIS and AISI Standard)
退火Annealing
电器用钢片用家需自行应力退火原因
Annealing of the Electrical Steel Sheet
退火时注意事项 Annealing Precautionary
碳污染 Prevent Carbon Contamination
热力应先从工件边缘透入
Heat from the Laminated Stacks Edges
提防过份氧化
No Excessive Oxidation
应力退火温度
Stress –relieving Annealing Temperature
晶粒取向电器用硅 [硅] 钢片 – 高硼(HI-B)定取向芯钢片及定取向芯钢片之机械性能及夹层系数

Mechanical Properties and Lamination Factors of SI-ORIENT-CORE-HI-B and SI-ORIENT-CORE Grain Orient Electrical Steel Sheets
晶粒取向电器用硅 [硅] 钢;片 – 高硼低硫(LS)定取向 钢片之磁力及电力性能

Magnetic and Electrical Properties of SI-ORIENT-CORE-HI-B-LS
晶粒取向电器用硅 [硅] 钢片 – 高硼低硫(LS) 定取向钢片之机械性能及夹层系数

Mechanical Properties and Lamination Factors of SI-ORIENT-CORE-HI-B-LS
晶粒取向电器用硅(硅)钢片-高硼(HI-B)定取向 芯钢片，定取向芯钢片及高硼低硫(LS)定取向芯钢片之厚度及阔度公差

Physical Tolerance of SI-ORIENT-CORE-HI-B, SI-ORIENT-CORE, & SI-CORE-HI-B-LS Grain
Oriented Electrical Steel Sheets
晶粒取向电器用硅(硅)钢片 – 高硼(HI-B)定取向 芯钢片，定取向芯钢片及高硼低硫(LS)定取向芯钢片之标准尺寸及包装

Standard Forms and Size of SI-ORIENT-CORE-HI-B,SI-CORE, & SI-ORIENT-CORE-HI-B-LS Grain-
Oriented Electrical Steel Sheets
绝缘表面 Surface Insulation
非晶粒取向电力用钢片的电力、磁力、机械性能 及夹层系数

Lamination Factors of Electrical, Magnetic & Mechanical Non-Grain Oriented Electrical
电器及家电外壳用镀层冷辘 [低碳] 钢片
Coated (Low Carbon) Steel Sheets for Casing,Electricals & Home Appliances
镀铝硅钢片 Aluminized Silicon Alloy Steel Sheet
简介 General
镀铝硅合金钢片的特色
Feature of Aluminized Silicon Alloy Steel Sheet
用途
End Usages
抗化学品能力
Chemical Resistance
镀铝(硅)钢片 – 日工标准(JIS G3314)
Hot-aluminum-coated sheets and coils to JIS G 3314
镀铝(硅)钢片 – 美材试标准(ASTM A-463-77)35.7 JIS G3314镀热浸铝片的机械性能

Mechanical Properties of JIS G 3314 Hot-Dip Aluminum-coated Sheets and Coils
公差 Size Tolerance
镀铝(硅)钢片及其它种类钢片的抗腐蚀性能比较
Comparsion of various resistance of aluminized steel & other kinds of steel
镀铝(硅)钢片生产流程
Aluminum Steel Sheet, Production Flow Chart
焊接能力 Weldability
镀铝钢片的焊接状态(比较冷辘钢片)
Tips on welding of Aluminized sheet in comparasion with cold rolled steel strip
钢板
Steel Plate
钢板用途分类及各国钢板的工业标准包括日工标准及美材试标准
Type of steel Plate & Related JIS, ASTM and Other Major Industrial Standards
钢板生产流程
Production Flow Chart
钢板订货需知
Ordering of Steel Plate
不锈钢
Stainless Steel
不锈钢的定义 Definition of Stainless Steel
不锈钢之分类，耐腐蚀性及耐热性
Classification, Corrosion Resistant & Heat Resistance of Stainless Steel
铁铬系不锈钢片
Chrome Stainless Steel
马氏体不锈钢
Martensite Stainless Steel
低碳马氏体不锈钢
Low Carbon Martensite Stainless Steel
含铁体不锈钢
Ferrite Stainless Steel
镍铬系不锈钢
Nickel Chrome Stainless Steel
释出硬化不锈钢
Precipitation Hardening Stainless Steel
铁锰铝不锈钢
Fe / Mn / Al / Stainless Steel
不锈钢的磁性
Magnetic Property & Stainless Steel
不锈钢箔、卷片、片及板之厚度分类
Classification of Foil, Strip, Sheet & Plate by Thickness
表面保护胶纸
Surface protection film
不锈钢片材常用代号
Designation of SUS Steel Special Use Stainless
表面处理 Surface finish
薄卷片及薄片(0.3至2.9mm厚之片)机械性能
Mechanical Properties of Thin Stainless Steel(Thickness from 0.3mm to 2.9mm) – strip/sheet
不锈钢片机械性能(301, 304, 631, CSP)
Mechanical Properties of Spring use Stainless Steel
不锈钢 – 种类，工业标准，化学成份，特点及 主要用途

Stainless Steel – Type, Industrial Standard, Chemical Composition, Characteristic & end usage of the most commonly used Stainless Steel
不锈钢薄片用途例
End Usage of Thinner Gauge
不锈钢片、板用途例
Examples of End Usages of Strip, Sheet & Plate
不锈钢应力退火卷片常用规格名词图解
General Specification of Tension Annealed Stainless Steel Strips
耐热不锈钢
Heat-Resistance Stainless Steel
镍铬系耐热不锈钢特性、化学成份、及操作温度
Heat-Resistance Stainless Steel
铬系耐热钢
Chrome Heat Resistance Steel
镍铬耐热钢
Ni - Cr Heat Resistance Steel
超耐热钢
Special Heat Resistance Steel
抗热超级合金
Heat Resistance Super Alloy
耐热不锈钢比重表
Specific Gravity of Heat – resistance steel plates and sheets stainless steel
不锈钢材及耐热钢材标准对照表
Stainless and Heat-Resisting Steels
发条片 Power Spring Strip
发条的分类及材料
Power Spring Strip Classification and Materials
上链发条 Wind-up Spring
倒后擦发条 Pull Back Power Spring
圆面("卜竹")发条 Convex Spring Strip
拉尺发条 Measure Tape
魔术手环 Magic Tape
魔术手环尺寸图Drawing of Magic Tap
定型发条 Constant Torque Spring
定型发条及上炼发条的驱动力

Spring Force of Constant Torque Spring and Wing-up Spring
定型发条的形状及翻动过程
Shape and Spring Back of Constant Torque Spring
定型发条驱动力公式及代号
The Formula and Symbol of Constant Torque Spring
边缘处理 Edge Finish
硬度 Hardness
高碳钢化学成份及用途
High Carbon Tool Steel, Chemical Composition and Usage
每公斤发条的长度简易公式
The Length of 1 Kg of Spring Steel Strip
SK-5 & AISI-301 每公斤长的重量/公斤(阔100-200公厘) Weight per one meter long (kg) (Width 100-200mm)
SK-5 & AISI-301 每公斤之长度(阔100-200公厘) Length per one kg (Width 100-200mm)
SK-5 & AISI-301 每公尺长的重量/公斤(阔2.0-10公厘)
Weight per one meter long (kg) (Width 2.0-10mm)
SK-5 & AISI-301 每公斤之长度(阔2.0-10公厘)
Length per one kg (Width 2.0-10mm)
高碳钢片 High Carbon Steel Strip
分类
Classification
用组织结构分类
Classification According to Grain Structure
用含碳量分类 – 即低碳钢、中碳钢及高碳钢
Classification According to Carbon Contains
弹簧用碳钢片
CarbonSteel Strip For Spring Use
冷轧状态 Cold Rolled Strip
回火状态 Annealed Strip
淬火及回火状态
Hardened & Tempered Strip/ Precision – Quenched Steel Strip
贝氏体钢片 Bainite Steel Strip
弹簧用碳钢片材之边缘处理 Edge Finished
淬火剂
Quenching Media
碳钢回火 Tempering
回火有低温回火及高温回火
Low & High Temperature Tempering
高温回火
High Temperature Tempering
退火 Annealing
完全退火 Full Annealing
扩散退火 Diffusion Annealing
低温退火 Low Temperature Annealing
中途退火 Process Annealing
球化退火 Spheroidizing Annealing
光辉退火 Bright Annealing
淬火 Quenching
时间淬火 Time Quenching
奥氏铁孻回火 Austempering
马氏铁体淬火 Marquenching
高碳钢片用途 End Usage of High Carbon Steel Strip
冷轧高碳钢 – 日本工业标准
Cold-Rolled (Special Steel) Carbon Steel Strip to JIS G3311
电镀金属钢片 Plate Metal Strip
简介 General
电镀金属捆片的优点
Advantage of Using Plate Metal Strip
金属捆片电镀层
Plated Layer of Plated Metal Strip
镀镍 Nickel Plated
镀铬 Chrome Plated
镀黄铜 Brass Plated
基层金属 Base Metal of Plated Metal Strip
低碳钢或铁基层金属
Iron & Low Carbon as Base Metal
不锈钢基层金属 Stainless Steel as Base Metal
铜基层金属
Copper as Base Metal
黄铜基层金属
Brass as Base Metal
轴承合金 Bearing Alloy
简介
General
轴承合金 – 日工标准 JIS H 5401
Bearing Alloy to JIS H 5401
锡基、铅基及锌基轴承合金比较表
Comparison of Tin base, Lead base and Zinc base alloy for Bearing purpose
易溶合金 Fusible Alloy
焊接合金 Soldering and Brazing Alloy
软焊 Soldering Alloy
软焊合金 – 日本标准 JIS H 4341
Soldering Alloy to JIS H 4341
硬焊 Brazing Alloy
其它焊接材料请参阅日工标准目录
Other Soldering Material
细线材、枝材、棒材
Chapter Five Wire, Rod & Bar
线材/枝材材质分类及制成品
Classification and End Products of Wire/Rod
铁线(低碳钢线)日工标准 JIS G 3532
Low Carbon Steel Wires ( Iron Wire ) to JIS G 3532
光线(低碳钢线)，火线(退火低碳钢线)，铅水线 (镀锌低碳钢线)及制造钉用低碳钢线之代号、公差及备注
Ordinary Low Carbon Steel Wire, Annealed Low Carbon Steel Wire, Galvanized low Carbon Steel Wire & Low Carbon Steel Wire for nail manufacturing - classification, Symbol of Grade, Tolerance and Remarks.
机械性能
Mechanical Properites
锌包层之重量，铜硫酸盐试验之酸洗次数及测试用卷筒直径

Weight of Zinc-Coating, Number of Dippings in Cupric Sulphate Test and Diameters of Mandrel Used for Coiling Test
冷冲及冷锻用碳钢线枝
Carbon Steel Wire Rods for Cold Heading & Cold Forging (to JIS G3507)
级别，代号及化学成份
Classification, Symbol of Grade and Chemical Composition
直径公差，偏圆度及脱碳层的平均深度
Diameter Tolerance, Ovality and Average Decarburized Layer Depth
冷拉钢枝材
Cold Drawn Carbon Steel Shafting Bar
枝材之美工标准，日工标准，用途及化学成份
AISI, JIS End Usage and Chemical Composition of Cold Drawn Carbon Steel Shafting Bar
冷拉钢板重量表
Cold Drawn Steel Bar Weight Table
高碳钢线枝
High Carbon Steel Wire Rod (to JIS G3506)
冷拉高碳钢线
Hard Drawn High Carbon Steel Wire
(to JIS G3521, ISO-84580-1&2)
化学成份分析表
Chemical Analysis of Wire Rod
线径、公差及机械性能(日本工业标准 G 3521)
Mechanical Properties (JIS G 3521)
琴线(日本标准 G3522)
Piano Wires ( to G3522)
级别，代号，扭曲特性及可用之线材直径
Classes, symbols, twisting characteristic and applied Wire Diameters
直径，公差及拉力强度
Diameter, Tolerance and Tensile Strength
裂纹之容许深度及脱碳层
Permissible depth of flaw and decarburized layer
常用的弹簧不锈钢线-编号，特性，表面处理及化学成份
StainlessSpring Wire – National Standard number, Charateristic, Surface finish & Chemical composition
弹簧不锈钢线，线径及拉力列表
Stainless Spring Steel, Wire diameter and Tensile strength of Spring Wire
处理及表面状况
Finish & Surface
各种不锈钢线在不同处理拉力比较表
Tensile Strength of various kinds of Stainless Steel Wire under Different Finish
圆径及偏圆度之公差
Tolerance of Wire Diameters & Ovality
铬镍不锈钢及抗热钢弹簧线材 –
美国材验学会 ASTM A313 – 1987
Chromium – Nickel Stainless and Heat-resisting Steel Spring Wire – ASTM A313 – 1987
化学成份 Chemical Composition
机械性能 Mechanical Properties
305, 316, 321及347之拉力表
Tensile Strength Requirements for Types 305, 316, 321 and 347
A1S1-302 贰级线材之拉力表
Tensile Strength of A1S1-302 Wire
日本工业标准 – 不锈钢的化学成份(先数字后字母排列)
JIS – Chemical Composition of Stainless Steel (in order of number & alphabet)
美国工业标准 – 不锈钢及防热钢材的化学成份
(先数字后字母排列)
AISI – Chemical Composition of Stainless Steel & Heat-Resistant Steel(in order of number & alphabet)
易车碳钢
Free Cutting Carbon Steels (to JIS G4804 )
化学成份 Chemical composition
圆钢枝，方钢枝及六角钢枝之形状及尺寸之公差
Tolerance on Shape and Dimensions for Round Steel Bar, Square Steel Bar, Hexagonal Steel Bar
易车(快削)不锈钢 Free Cutting Stainless Steel
易车(快削)不锈钢种类 Type of steel
易车(快削)不锈钢拉力表
Tensile Strength of Free Cutting Wires
枝/棒无芯磨公差表 (μ) (μ = 1/100 mm)
Rod/Bar Centreless Grind Tolerance
易车不锈钢及易车钢之不同尺寸及硬度比较
Hardness of Different Types & Size of Free Cutting Steel
扁线、半圆线及异形线
Flat Wire, Half Round Wire, Shaped Wire and Precision Shaped Fine Wire
加工方法
Manufacturing Method
应用材料
Material Used
特点
Characteristic
用途
End Usages
不锈钢扁线及半圆线常用材料
Commonly used materials for Stainless Flat Wire & Half Round Wire
扁线公差
Flat Wire Tolerance
方线公差
Square Wire Tolerance


GB/T 221-1979 钢铁产品牌号表示方法 Notations for markings of iron and steel products
2 GB/T 341-1989 钢丝分类及术语 Steel wire—Classification and vocabular
3 GB/T 343-1994 一般用途低碳钢丝 Low carbon steel wire for general uses
4 GB/T 346-1984 通讯线用镀锌低碳钢丝 Galvanized low carbon steel wire for electric communications lines
5 GB/T 347-1982 针布钢丝 Card wire
6 GB/T 348-1964 刺钢丝 Barbed steel wires
7 GB/T 352-1988 密封钢丝绳 Locked coil wire ropes
8 GB/T 699-1988 优质碳素结构钢 技术条件 Quality carbon structure steel--Technical requirements
9 GB/T 700-1988 碳素结构钢 Carbon structural steels
10 GB/T 702-1986 热轧圆钢和方钢尺寸、外形、重量及允许偏差 Hot-rolled round and square steels--Dimension,shape, weight and tolerance
11 GB/T 704-1988 热轧扁钢尺寸、外形、重量及允许偏差 Dimensions, shape, weight and tolerances for hot-rolled flats
12 GB/T 705-1989 热轧六角钢和八角钢尺寸、外形、重量及允许偏差 Hot-rolled hexagonal and octagonal steel bars—Dimensions, shape, weight and tolerance
13 GB/T 706-1988 热轧工字钢尺寸、外形、重量及允许偏差 Hot-rolled beam steel—Dimensions, shape, weight and tolerances
14 GB/T 707-1988 热轧槽钢尺寸、外形、重量及允许偏差 Hot-rolled channel steel—Dimensions, shape, weight and tolerances
15 GB/T 708-1988 冷轧钢板和钢带的尺寸、外形、重量及允许偏差 Dimensions, shape, weight and tolerances for cold-rolled plates and sheets
16 GB/T 709-1988 热轧钢板和钢带的尺寸、外形、重量及允许偏差 Dimensions, shape, weight and tolerances for hot-rolled plates and sheets
17 GB/T 710-1991 优质碳素结构钢热轧薄钢板和钢带 Hot-rolled quality carbon structural steel sheets and strips
18 GB/T 711-1988 优质碳素结构钢热轧厚钢板和宽钢带 Hot-rolled quality carbon structural steel plates and wide strips
19 GB 712-1988 船体用结构钢 Hull structural steel
20 GB/T 714-1965 桥梁建筑用热轧碳素钢 技术条件 Technical requirements for hot-rolled carbon steels for bridges

21 GB/T 715-1989 标准件用碳素钢热轧圆钢 Hot-rolled round carbon steel bars for standard parts
22 GB/T 716-1991 碳素结构钢冷轧钢带 Cold-rolled carbon structural steel strips
23 GB/T 718-1982 铸造用生铁 Foundry pig iron
24 GB/T 905-1994 冷拉圆钢、方钢、六角钢尺寸、外形、重量及允许偏差 Dimension, shape, weight and tolerance for cold-drawn round, square and hexagonal steels
25 GB/T 908-1987 锻制圆钢和方钢尺寸、外形、重量及允许偏差 Forged round and square steels--Dimension, shape, weightand tolerance
26 GB/T 911-1966 工具钢热轧及锻制扁钢品种 Hot-rolled and forged tool steel flats
27 GB/T 912-1989 碳素结构钢和低合金结构钢热轧薄钢板及钢带 Hot-rolled plain carbon and low alloy structural steel sheets and strips
28 GB/T 1220-1992 不锈钢棒 Stainless steel bars
29 GB/T 1221-1992 耐热钢棒 Heat-resisting steel bars
30 GB/T 1222-1984 弹簧钢 Spring steel
31 GB/T 1234-1995 高电阻电热合金 High resistance alloys for electrical heating
32 GB/T 1298-1986 碳素工具钢技术条件 Carbon tool steels--Technical requirements
33 GB/T 1299-1985 合金工具钢技术条件 Alloy tool steels--Technical requirements
34 GB/T 1301-1994 凿岩钎杆用中空钢 Rock drilling equipment--Hollow drill steels in bar form
35 GB/T 1412-1985 球墨铸铁用生铁 Pig iron used for spheroidal graphite cast iron
36 GB/T 1591-1994 低合金高强度结构钢 High strength low alloy structural steels
37 GB/T 2101-1989 型钢验收、包装、标志及质量证明书的一般规定 General requirements of acceptance, packaging, marking and certification for section steel
38 GB/T 2102-1988 钢管的验收、包装、标志和质量证明书 Acceptance, packing, marking, and certification of pipe
39 GB/T 2103-1988 钢丝验收、包装、标志及质量证明书的一般规定 General provisions for checking, packing, marking and quality certification of steel wire
40 GB/T 2104-1988 钢丝绳包装、标志及质量证明书的一般规定 Steel wire ropes--Packing, marking and certificate--General requirements
41 GB/T 2272-1987 硅铁 Ferrosilicon
42 GB/T 2517-1981 一般结构用热连轧钢板和钢带 Continuously hot rolled steel sheets and strips for common structures
43 GB/T 2518-1988 连续热镀锌薄钢板和钢带 Continual hot-dip zinc-coated steel sheets and strips
44 GB/T 2519-1981 热连轧钢板和钢带品种 Varieties of continuously hot rolled steel sheets and strips
45 GB/T 2520-1988 电镀锡薄钢板和钢带 Tin electroplated steel sheets and strips
46 GB/T 2521-1996 冷轧晶粒取向、无取向磁性钢带(片) Cold-rolled grain-oriented and non-oriented magnetic steel strip(sheet)
47 GB 2585-1981 铁路用每米38~50公斤钢轨技术条件 Technical requirements for 38kg/m to 50kg/m steel rails for railway
48 GB/T 2597-1994 窗框用热轧型钢 Heat-rolled window sash steel
49 GB/T 2774-1991 金属锰 Manganese metal
50 GB/T 2826-1981 每米38~50公斤钢轨用垫板 技术条件 Tie-plates--Technical requirements for 38kg/m to 50 kg/m steel rails
51 GB/T 3077-1988 合金结构钢技术条件 Alloy structure steel--Technical requirements
52 GB/T 3078-1994 优质结构钢冷拉钢材技术条件 Technical requirements for quality structural steel cold drawn bars
53 GB/T 3079-1993 合金结构钢丝 Alloy structure steel wires
54 GB/T 3080-1982 高速工具钢丝 High speed tool steel wire
55 GB/T 3082-1984 铠装电缆用镀锌低碳钢丝 Galvanized low carbon steel wire for armouring cables
56 GB/T 3086-1982 高碳铬不锈轴承钢技术条件 Specification for high carbon chromium stainless bearing steels
57 GB 3087-1982 低中压锅炉用无缝钢管 Seamless steel tubes for low and medium pressure boiler
58 GB/T 3089-1982 不锈耐酸钢极薄壁无缝钢管 Thinnest-wall seamless tubes of stainless and acid-resistance steel
59 GB/T 3090-1982 不锈钢小直径钢管 Slainless steel small diameter steel tubes
60 GB/T 3091-1993 低压流体输送用镀锌焊接钢管 Galvanized welded steel pipe for low pressure service
61 GB/T 3092-1993 低压流体输送用焊接钢管 Welded steel pipe for low pressure service
62 GB/T 3094-1982 冷拔无缝异型钢管 Cold drawn seamless special-shape steel pipe
63 GB/T 3203-1982 渗碳轴承钢技术条件 Specification for carburizing steels of bearings
64 GB/T 3206-1982 优质碳素结构钢丝 Carbon constructional quality steel wires
65 GB/T 3207-1988 银亮钢 Bright steel
66 GB/T 3211-1987 金属铬 Chromium metal
67 GB/T 3273-1989 汽车大梁用热轧钢板 Hot-rolled steel plates and sheets for automobile frames
68 GB/T 3274-1988 碳素结构钢和低合金结构钢 热轧厚钢板和钢带 Carbon structural and low alloy steel--Rotled plates and strips
69 GB/T 3275-1991 汽车制造用优质碳素结构钢热轧钢板和钢带 Hot-rolled quality carbon structural steel plates and strips for automobile
70 GB/T 3277-1991 花纹钢板 Corrugated steel plates with lath and lentilform
71 GB/T 3278-1982 碳素工具钢热轧钢板技术条件 Technical requirements for hot-rolled carbon tool steel sheets and plates
72 GB/T 3279-1989 弹簧钢热轧薄钢板 Hot-rolled spring steel sheets
73 GB/T 3280-1992 不锈钢冷轧钢板 Cold rolled stainless steel sheets and plates
74 GB/T 3282-1987 钛铁 Ferrotitanium
75 GB/T 3414-1994 煤机用热轧异型钢 Hot-rolled profiled steels for coal mechanism
76 GB/T 3418-1982 电解金属锰 Electrolytic manganese metal
77 GB/T 3420-1982 灰口铸铁管件 Gray iron castigs for pipe fittings
78 GB/T 3421-1982 砂型离心铸铁管 Cast-iron pressure pipe centrifugally cast in sand-lined molds
79 GB/T 3422-1982 连续铸铁管 Cast-iron pressure pipe made by continuous casting process
80 GB 3423-1982 金刚石岩心钻探用无缝钢管 Seamless steel tubes standard use diamond core dvilling
81 GB/T 3429-1994 焊接用钢盘条 Wire rods for electrode
82 GB/T 3522-1983 优质碳素结构钢冷轧钢带 Cold-rolled quality carbon structural steel strips
83 GB/T 3524-1992 碳素结构钢和低合金结构钢热轧钢带 Hot-rolled cardon and low alloy structural steel strips
84 GB 3531-1996 低温压力容器用低合金钢钢板 Low alloy steel plates for low temperature pressure vessels
85 GB/T 3639-1983 冷拔或冷轧精密无缝钢管 Cold-drawn or rolled precision seamless steel tubes
86 GB/T 3640-1988 普通碳素钢电线套管 Plain carbon steel pipes for electric wire
87 GB/T 3641-1983 P3型镀锌金属软管 Type p3 galvanized metallic flexible hose
88 GB/T 3642-1983 S型钎焊不锈钢金属软管 Type S brazed stainless steel flexible metallic hose
89 GB/T 3648-1996 钨铁 Ferrotungsten
90 GB/T 3649-1987 钼铁 Ferromolybdenum
91 GB/T 3650-1995 铁合金验收、包装、储运、标志和质量证明书的一般规定 The general rules for inspection, packing, storing transportation, marking and certification of ferroalloy
92 GB/T 3795-1996 锰铁 Ferromanganese
93 GB/T 4008-1996 锰硅合金 Ferromanganese-silicon
94 GB/T 4009-1989 硅铬合金 Chromium silicon
95 GB/T 4010-1994 铁合金化学分析用试样的采取和制备 Ferroalloys--Sampling and preparation of samples for chemical analysis
96 GB/T 4137-1993 稀土硅铁合金 Rare-earth ferrosilicon
97 GB/T 4138-1993 稀土镁硅铁合金 Rare-earth ferrosilicomagnesium
98 GB/T 4139-1987 钒铁 Ferrovanadium
99 GB/T 4223-1996 废钢铁 Iron and steel scraps
100 GB/T 4226-1984 不锈钢冷加工钢棒 Cold finished stainless steel bars
101 GB/T 4227-1984 不锈钢热轧等边角钢 Hot rolled stainless steel with equal leg angles
102 GB/T 4229-1984 不锈钢板重量计算方法 Methods of weight calculation of stainless steel plates and sheets
103 GB/T 4231-1993 弹簧用不锈钢冷轧钢带 Cold rolled stainless steel strips for springs
104 GB/T 4232-1993 冷顶锻用不锈钢丝 Stainless steel wires for cold heading and cold for- ging
105 GB 4234-1994 外科植入物用不锈钢 Stainless steel for surgical implants
106 GB/T 4237-1992 不锈钢热轧钢板 Hot rolled stainless steel sheets and plates
107 GB/T 4238-1992 耐热钢板 Heat-resisting steel sheets and plates
108 GB/T 4239-1991 不锈钢和耐热钢冷轧钢带 Cold rolled stainless steel and heatresisting steel strips
109 GB/T 4240-1993 不锈钢丝 Stainless steel wires
110 GB/T 4241-1984 焊接用不锈钢盘条 Stainless steel wire rods for welding
111 GB/T 4354-1994 优质碳素钢热轧盘条 Hot-rolled quality carbon steel wire rods
112 GB/T 4356-1984 不锈钢盘条 Stainless steel wire rods
113 GB/T 4357-1989 碳素弹簧钢丝 Carbon spring steel wires
114 GB/T 4358-1995 重要用途碳素弹簧钢丝 Carbon spring steel wire for significant use
115 GB/T 4461-1992 热双金属带材 Thermostatic bimetal strips
116 GB 4463-1984 预应力混凝土用热处理钢筋 Heat-treated steel bar for prestressed concrete
117 GB/T 4697-1991 矿山巷道支护用热轧U 型钢 Hot-rolled U-type steel for mine timbering
118 GB 5068-1985 铁路机车、车辆用车轴钢坯 Axles blooms for railway locomotive and wagons
119 GB/T 5213-1985 深冲压用冷轧薄钢板和钢带 Cold rolled sheets and strips for deep drawing
120 GB/T 5216-1985 保证淬透性结构钢技术条件 Technical requirements for structural steel with specified hardenability bands
121 GB/T 5218-1985 硅锰弹簧钢丝 Silicon-manganese spring steel wire
122 GB/T 5219-1985 铬钒弹簧钢丝 Chromium-vanadiam spring steel wire
123 GB/T 5221-1985 铬硅弹簧钢丝 Chromium-silicon spring steel wire
124 GB/T 5222-1985 弹簧垫圈用梯形钢丝 Trapezed steel wire for spring washer
125 GB/T 5223-1995 预应力混凝土用钢丝 Steel wires for prestressed concrete
126 GB/T 5224-1995 预应力混凝土用钢铰线 Steel strand for prestressed concrete
127 GB 5310-1995 高压锅炉用无缝钢管 Seamless steel tubes and pipes for high pressure boiler
128 GB/T 5312-1985 船舶用碳钢无缝钢管 Carbon steel seamless steel tubes for ship
129 GB/T 5313-1985 厚度方向性能钢板 Steel plate with through-thickness characteristics
130 GB/T 5612-1985 铸铁牌号表示方法 Code for representing cast iron
131 GB/T 5682-1995 硼铁 Ferroboron
132 GB/T 5683-1987 铬铁 Ferrochromium
133 GB/T 5684-1987 真空法微碳铬铁 Vacuum extra low carbon ferrochromium
134 GB/T 5952-1986 碳素工具钢丝 Carbon tool steel wires
135 GB/T 5953-1986 冷顶锻用碳素结构钢丝 Carbon structure steel wires for cold heading
136 GB/T 5954-1986 冷顶锻用合金结构钢丝 Alloy structure steel wires for cold heading
137 GB/T 6145-1985 锰铜、康铜精密电阻合金 Manganin and constantan precision resistance alloys
138 GB/T 6149-1985 新康铜电阻合金 New constantan resistance alloy
139 GB/T 6478-1986 冷镦钢技术条件 Cold heading steel--Technical requirements
140 GB 6479-1986 化肥设备用高压无缝钢管 High-pressure seamless steel tubes for chemical fertilizer equipments
141 GB/T 6480-1994 凿岩用硬质合金钎头 Carbide detachable bit for rock drilling
142 GB/T 6481-1994 凿岩用锥形连接中空六角形钎杆 Hollow hexagonal drill rods with tapered connection for rock drilling
143 GB/T 6482-1994 凿岩用波形螺纹连接钎杆 Rope thread extension steel bars for rock drilling
144 GB/T 6483-1986 柔性机械接口灰口铸铁管 Soft mechanical joint grey cast iron pipe
145 GB 6653-1994 焊接气瓶用钢板 Steel plates for welded gas cylinders
146 GB 6654-1996 压力容器用钢板 Steel plates for pressure vessels
147 GB/T 6723-1986 通用冷弯开口型钢尺寸、外形、重量及允许偏差 Cold forming sectional steel--Open sectional steel for general structure--Demension, form, weight and permissible deviations
148 GB/T 6724-1986 冷弯波形钢板 Cold forming corrugated sheet
149 GB/T 6725-1992 冷弯型钢技术条件 Technical requirements of cold forming sectional steel
150 GB/T 6726-1986 货运汽车用冷弯型钢尺寸、外形、重量及允许偏差 Cold forming sectional steel for cargo vehicle--Demension, form, weight and permissible deviations
151 GB/T 6727-1986 客运汽车用冷弯型钢尺寸、外形、重量及允许偏差 Cold forming sectional steel for passenger vehicle--Demension, form, weight and permissible deviations
152 GB/T 6728-1986 结构用冷弯空心型钢尺寸、外形、重量及允许偏差 Cold forming sectional steel--Hollow sectional steel for general structure--Demension, form, weight and permissible deviations
153 GB/T 6883-1995 线、棒和管拉模用硬质合金模坯 Wire、bar or tube drawing dies--As sintered pellets of hardmetal
154 GB/T 6983-1986 电磁纯铁棒材技术条件 Technical requirements for magnetic iron bars
155 GB/T 6984-1986 电磁纯铁热轧厚板技术条件 Technical requirements for magnetic iron hot-rolled plates
156 GB/T 6985-1986 电磁纯铁冷轧薄板 Magnetic iron cold-rolled sheets
157 GB/T 7738-1987 铁合金产品牌号表示方法 Notations for designation of ferroalloys
158 GB/T 8162-1987 结构用无逢纲管 Seamless steel pipes for structural purposes
159 GB/T 8163-1987 输送流体用无缝钢管 Seamless steel pipes for liquid service
160 GB/T 8164-1993 焊接钢管用钢带 Steel strips for welded steel pipe
161 GB 8601-1988 铁路用辗钢整体车轮 Rolled solid wheels for railway
162 GB 8602-1988 铁路用粗制轮箍 Rough-rolled tyres for railway
163 GB/T 8649-1988 轧制钢球 Rolling balls
164 GB/T 8706-1988 钢丝绳术语 Steel wire ropes--Terminology
165 GB/T 8713-1988 液压和气动缸筒用精密内径无缝钢管 Inside diameter required precision seamless steel tube for hydraulic and pneumatic cylinder use
166 GB/T 8714-1988 梯唇型橡胶圈接口铸铁管 Grey cast iron pipes with rubber ring of ladder-lip-shaped
167 GB/T 8715-1988 柔性机械接口铸铁管件 Soft mechanical joint grey cast iron fittings
168 GB/T 8731-1988 易切削结构钢 技术条件 Free-cutting steel--Technical requirements
169 GB/T 8732-1988 汽轮机叶片用钢 Steels for vane of steam turbine
170 GB/T 8749-1988 优质碳素结构钢热轧钢带 Hot-rolled quality carbon structural steel strips
171 GB 8903-1988 电梯用钢丝绳 Steel wire ropes for elevators
172 GB/T 8918-1996 钢丝绳 Steel wire ropes
173 GB/T 8919-1996 制绳用钢丝 Wire for steel wire ropes use
174 GB/T 9787-1988 热轧等边角钢 尺寸、外形、重量及允许偏差 Hot-rolled equal--leg angle steel--Dimensions, shape, weight and tolerances
175 GB/T 9788-1988 热轧不等边角钢 尺寸、外形、重量及允许偏差 Hot-rolled unequal--leg angle steel--Dimensions, shape, weight and tolerances
176 GB/T 9941-1988 高速工具钢钢板技术条件 High speed tool steel sheets and plates--Technical requirements
177 GB/T 9942-1988 高速工具钢大截面锻制钢材技术条件 High speed tool steel forged bars with large section--Technical requirements
178 GB/T 9943-1988 高速工具钢棒技术条件 High speed tool steel bars--Technical requirements
179 GB/T 9944-1988 不锈钢丝绳 Stainless steel wire ropes
180 GB/T 9945-1988 造船用球扁钢 Bulb flat steel for shipbuilding
181 GB/T 9946-1988 热轧L型钢尺寸、外形、重量及允许偏差 Dimensions, shape, weight and tolerances for hot-rolled L-sectional steel
182 GB 9948-1988 石油裂化用无缝钢管 Seamless steel tubes for petroleum cracking
183 GB/T 9971-1988 原料纯铁 Pure iron for raw material
184 GB/T 10131-1988 铌锰铁合金 Mn-Nb-Fe alloy
185 GB/T 10560-1989 矿用高强度圆环链用钢技术条件 High tensile steels for round link chains for mines—Technical requirements
186 GB/T 11181-1989 子午线轮胎用钢丝帘线 Steel cord for radial tyre
187 GB/T 11182-1989 橡胶软管增强用钢丝 Steel wire for hose reinfocement
188 GB/T 11251-1989 合金结构钢热轧厚钢板 Hot-rolled alloy structural steel plates
189 GB/T 11252-1989 犁壁用热轧三层钢板和宽钢带 Hot-rolled tri-clad plates and wide strips for plough wall
190 GB/T 11253-1989 碳素结构钢和低合金结构钢冷轧薄钢板及钢带 Cold-rolled plain carbon and low alloy structural steel sheets and strips
191 GB/T 11254-1989 压缩机阀片用热轧薄钢板 Hot rolled steel sheets for compressor valves
192 GB/T 11256-1989 粗直径钢丝绳 Large diameter steel wire ropes
193 GB/T 11264-1989 轻轨 Light rails
194 GB/T 11265-1989 轻轨用接头夹板 Fish plates for light rails
195 GB/T 11266-1989 轻轨用垫板 Tie plates for light rails
196 GB/T 12753-1991 输送带用钢丝绳 Steel wire ropes for conveyer belts
197 GB/T 12754-1991 彩色涂层钢板及钢带 Coloured paint coat steel plates and strips
198 GB/T 12755-1991 建筑用压型钢板 Roll-profiled steel sheet for building
199 GB/T 12756-1991 胶管用钢丝绳 Steel wire ropes for rubber hose
200 GB/T 12770-1991 机械结构用不锈钢焊接钢管 Welded stainless steel tubes for machine structure
201 GB/T 12771-1991 流体输送用不锈钢焊接钢管 Welded stainless steel pipes for liquid delivery
202 GB/T 12772-1991 排水用柔性接口铸铁管及管件 Cast iron pipes and fittings with flexible joint for semerage
203 GB/T 12773-1991 内燃机气阀钢钢棒技术条件 Valve steel bars for internal combustion engines—Technical requirements
204 GB 13013-1991 钢筋混凝土用热轧光圆钢筋 Hot rolled plain steel bars for the reinforcement of concrete
205 GB 13014-1991 钢筋混凝土用余热处理钢筋 Remained heat treatment ribbed steel bars for the reinforcement of concrete
206 GB/T 13237-1991 优质碳素结构钢冷轧薄钢板和钢带 Cold-rolled quality carbon structural steel sheets and strips
207 GB/T 13238-1991 铜钢复合钢板 Copper-steel clad plates
208 GB/T 13294-1991 球墨铸铁管件 Ductile iron pipe fittings
209 GB/T 13295-1991 离心铸造球墨铸铁管 Centrifugal casting ductile iron pipe
210 GB 13296-1991 锅炉、热交换器用不锈钢无缝钢管 Seamless stainless steel tubes for boiler and heat exchanger
211 GB/T 13297-1991 精密合金包装、标志和质量证明书的一般规定 General rules for packaging, marking and certification of precision alloys
212 GB/T 13304-1991 钢分类 Steels—Classification
213 GB 13447-1992 无缝气瓶用钢坯 Steel blank for seamless gas cylinder
214 GB 13788-1992 冷轧带肋钢筋 Cold rolling ribbed steel wires and bars
215 GB/T 13790-1992 日用搪瓷用冷轧薄钢板和钢带 Cold rolled sheets and strips for civil enameling
216 GB/T 13791-1992 冷拉异型钢 Cold drawn special shaped steel bar
217 GB/T 13792-1992 带式输送机托辊用电焊钢管 Welded steel pipe for supporting roller of belt conveyer
218 GB/T 13793-1992 直缝电焊钢管 Longitudinal electric resistance welded steel tubes
219 GB/T 13795-1992 工业链条用冷轧钢带 cold-rolled steel strips for industial chain
220 GB/T 13796-1992 工业链条用冷拉钢 Cold-drawn steels for industrial chain
221 GB/T 14164-1993 石油天然气输送管用热轧宽钢带 Hot-rolled wide strips for line pipe of oil and natural gas
222 GB/T 14291-1993 矿用流体输送电焊钢管 Welded steel pipe for mine liquid service
223 GB/T 14292-1993 碳素结构钢和低合金结构钢热轧条钢技术条件 Hot-rolled long products technical requirements for carbon structure steel and low-alloy structure steel
224 GB 14450-1993 胎圈用钢丝 Bead wire
225 GB/T 14451-1993 操纵用钢丝绳 Steel wire ropes for control
226 GB/T 14957-1994 熔化焊用钢丝 Steel wires for melt welding
227 GB/T 14958-1994 气体保护焊用钢丝 Steel wires for gas shielded welding
228 GB/T 14975-1994 结构用不锈钢无缝钢管 Stainless steel seamless tubes for structures
229 GB/T 14976-1994 流体输送用不锈钢无缝钢管 Stainless steel seamless pipes for fluid transport
230 GB/T 14977-1994 热轧钢板表面质量的一般要求 General requirement of surface finish for hot rolled steel plates
231 GB/T 14978-1994 连续热浸镀铝锌硅合金镀层钢带和钢板 Continual hot-dip aluminium zinc silicon alloy coated steel strips and sheets
232 GB/T 14980-1994 低压流体输送用大直径电焊钢管 Major diameter welded steel pipe for lowpressure liquid service
233 GB/T 14981-1994 热轧盘条尺寸、外形、重量及允许偏差 Dimenisions shape weight and tolerances for hot-rolled wire rods
234 GB/T 14984-1994 铁合金术语 Ferroalloys--Vocabulary
235 GB/T 14985-1994 膨胀合金的尺寸、外形、表面质量、试验方法和检验规则的一般规定
236 GB/T 14986-1994 耐蚀软磁合金技术条件
237 GB/T 14987-1994 高硬度高电阻高磁导合金 High permability alloys with high hardness and high electrical resistance
238 GB/T 14988-1994 磁滞合金冷轧带 Cold-rolled strips for hysteresis alloys
239 GB/T 14989-1994 铁钴钒永磁合金 Iron-cobalt-vanadium permanent-magnet alloys
240 GB/T 14990-1994 铁钴钼磁滞合金热轧(或锻)棒材 Hot rolled (or forged) bars for iron-cobalt-molybdenum hysteresis alloys
241 GB/T 14991-1994 变形永磁钢 Deformable permanent-magnet steels
242 GB/T 14992-1994 高温合金牌号 Types of heat-resisting superalloys
243 GB/T 14993-1994 转动部件用高温合金热轧棒材 Hot-rolled heat-resisting superalloy bars for rotating parts
244 GB/T 14994-1994 高温合金冷拉棒材 Cold brawn heat-resisting superalloy bars
245 GB/T 14995-1994 高温合金热轧钢板 Hot-rolled heat-resisting superalloy plates
246 GB/T 14996-1994 高温合金冷轧薄板 Cold-Rolled heat-Resisting superalloy sheets
247 GB/T 14997-1994 高温合金锻制圆饼 Forged heat-resisting superalloy disks
248 GB/T 14998-1994 高温合金环件毛坯 Heat-resisting superalloy blanks for forged rings
249 GB/T 14999.1-1994 高温合金棒材纵向低倍组织酸浸试验法 Methods of acid etch test for longitudinal macro-structures of heat-resisting superalloy bars
250 GB/T 14999.2-1994 高温合金横向低倍组织酸浸试验法 Methods of acid etch test for transvese macro-structures of heat-resisting superalloys
251 GB/T 14999.3-1994 高温合金棒材纵向断口试验法 Methods of longitudinal fracture test for heat-resisting superalloy bars
252 GB/T 14999.4-1994 高温合金显微组织试验法 Methods of examining micro-structures for heat-resisting superalloys
253 GB/T 14999.5-1994 高温合金低倍、高倍组织标准评级图谱 Photomicrographs and photomacrographs for evaluating of heat-resisting superalloys
254 GB/T 15001-1994 软磁合金尺寸、外形、表面质量、试验方法和检验规则的一般规定
255 GB/T 15002-1994 高饱和磁感应强度软磁合金技术条件
256 GB/T 15003-1994 恒磁导率合金技术条件
257 GB/T 15004-1994 铁铝软磁合金技术条件
258 GB/T 15005-1994 磁温度补偿合金技术条件
259 GB/T 15006-1994 弹性合金的尺寸、外形、表面质量、试验方法和检验规则的一般规定
260 GB/T 15007-1994 耐蚀合金牌号
261 GB/T 15008-1994 耐蚀合金棒
262 GB/T 15009-1994 耐蚀合金热轧板
263 GB/T 15010-1994 耐蚀合金冷轧薄板
264 GB/T 15011-1994 耐蚀合金冷轧(拔)无缝管
265 GB/T 15012-1994 耐蚀合金冷轧带
266 GB/T 15013-1994 精密合金用磁学特性和磁学量术语
267 GB/T 15014-1994 弹性合金领域内的物理特性和物理量术语与定义
268 GB/T 15015-1994 膨胀合金领域内的物理特性和物理量术语与定义
269 GB/T 15016-1994 热双金属领域内的物理特性和物理量术语与定义
270 GB/T 15017-1994 电阻合金领域内的物理特性和物理量术语与定义
271 GB/T 15018-1994 精密合金牌号
272 GB/T 15019-1994 快淬金属的分类和牌号
273 GB/T 15062-1994 一般用途高温合金管 Heat--resisting superalloy tube for general application
274 GB/T 15391-1994 宽度小于600mm冷轧钢带的尺寸、外形及允许偏差 Dimensions,shape and tolerances for cold-rolled steel strips with a width lessthan 600mm
275 GB/T 15392-1994 宽度小于700mm连续热镀锌钢带 Continual hot-dip zinc-coated steel strips with a width less than 700mm
276 GB/T 15393-1994 钢丝镀锌层 Zinc coatings for steel wire
277 GB/T 15574-1995 钢产品分类 Steel products classification and definitions
278 GB/T 15575-1995 钢产品标记代号 Steel products standard designation
279 GB/T 15675-1995 连续电镀锌冷轧钢板及钢带 Continuously electrolytic zinc-coated cold-rolled steel sheets and strips
280 GB/T 15710-1995 硅钡合金 Silicon barium alloy
281 GB/T 15712-1995 非调质机械结构钢 Ferritic--Pearlitic engineering steels for precipitation hardening from hot--Working temperature
282 GB/T 16269-1996 面接触钢丝绳 Facial contacted wire ropes
283 GB/T 16270-1996 高强度结构钢热处理和控轧钢板、钢带 High-strength structural steel plates and strips: products supplied in the heat-treated or controlled rolled condition
284 GB/T 16271-1996 钢丝绳吊索--插编索扣 Steel wire ropes--Spliced eye termination for slings
285 GB/T 342-1997 冷拉圆钢丝、方钢丝、六角钢丝尺寸、外形、重量及允许偏差 Dimension shape mass and tolerance for cold-drawn round square and hexagonal steel wires
286 GB/T 701-1997 低碳钢热轧圆盘条 Hot-rolled low carbon steel wire rods
287 GB/T 16761-1997 锻制扁钢尺寸、外形、重量及允许偏差 Dimensions,shape,weight and tolerances for forged flats
288 GB/T 16762-1997 一般用途钢绳吊索特性和技术条件 Wire rope slings for general purposes--Characteristics and specifications
289 GB/T 181-1963 每米50公斤钢轨型式尺寸 50 kg/m Steel rails
290 GB/T 182-1963 每米43公斤钢轨型式尺寸 43 kg/m steel rails
291 GB/T 183-1963 每米38公斤钢轨型式尺寸 38 kg/m steel rails
292 GB/T 184-1963 每米50公斤钢轨用鱼尾板式尺寸 Fish-plates for 50 kg/m steel rails
293 GB/T 185-1963 每米38及43公斤钢轨用鱼尾板型式尺寸 Fish-plates for 43 kg/m and 38 kg/m steel rails
294 GB/T 186-1963 每米50公斤钢轨用垫板型式尺寸 Tie-plates for 50 kg/m steel rails
295 GB 713-1997 锅炉用钢板 Steel plates for boilers
296 GB 17100-1997 外科植入物用铸造钴铬钼合金 Casting Co-Cr-Mo alloy for surgical implants
297 GB/T 247-1997 钢板和钢带检验、包装、标志及质量证明书的一般规定 General rule of acceptance,package,mark and certification for steel plates(sheets) and strips
298 GB/T 3428-1997 钢芯铝绞线用镀锌钢丝 Galvanized steel core wires for aluminium cable steel reinforced
299 GB/T 7737-1997 铌铁 Ferroniobium
300 GB/T 8165-1997 不锈钢复合钢板和钢带 Stainless steel clab plates and strips
301 GB/T 17101-1997 桥梁缆索用热镀锌钢丝 Hot-dip galvanized steel wires for bridge cables
302 GB/T 17102-1997 不锈复合钢冷轧薄钢板和钢带 Cold rolled stainless steel clad sheets and strips
303 GB/T 17107-1997 锻件用结构钢牌号和力学性能 Structural steel grades and mechanical property for forgings
304 GB/T 17395-1998 无缝钢管尺寸、外形、重量及允许偏差 Dimensions、shapes、masses and tolerances of seamless steel tubes
305 GB/T 17396-1998 液压支柱用热轧无缝钢管 Seamless hot--Rolled steel tubes for hydraulic pillar service
306 GB/T 11263-1998 热轧H型钢和剖分T型钢 The hot-rolled H and cut T section steel
307 GB/T 17456-1998 球墨铸铁管 外表面喷锌涂层 Ductile iron pipes--External zinc-spray coating
308 GB/T 17457-1998 球墨铸铁管 水泥砂浆离心法衬层 一般要求 Ductile iron pipes--Centrifugal cement mortar lining--General requirements
309 GB/T 17458-1998 球墨铸铁管 水泥砂浆离心法衬层 新拌砂浆的成份检验 Ductile iron pipes--Centrifugal cement mortar lining--Composition controls of freshly applied mortar
310 GB/T 17459-1998 球墨铸铁管 沥青涂层 Ductile iron pipes--Bitumen coating
311 GB/T 17505-1998 钢及钢产品交货一般技术要求 Steel and steel products General technical delivery requirements
312 GB 1499-1998 钢筋混凝土用热轧带肋钢筋 Hot rolled ribbed steel bars for the reinforcement of concrete
313 GB/T 717-1998 炼钢用生铁 Pig iron for steelmaking
314 GB/T 17616-1998 钢铁及合金牌号统一数字代号体系 Unified numbering system for designations of iron,steel and alloy